Further Ideas

• Construct a Jig with some pins / then pre-drill the board with holes that align
  the idea is to keep the placement when the board is flipped over for double sided boards http://www.instructables.com/id/Double-sided-PCBs-with-a-laser-cutter/

• Look into Mylar / Kapton solder paste stencils

• Use coats of Glass paint Pebeo Vitrea for the solder mask / use the laser to remove paint on the pads before final curing

• Add docs for Eagle gerber export
• Consult with Ruth on the best approaches to remove the risidual left over paint via IPA
• For the paint check what Fred Aldous has available / Halfords